
        Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
                   for SCO OpenServer V5.0 MDI Driver


 Getting Started
 ---------------

0. Login as root user. (On maintenance mode)

1. Use "custom" to install the driver

    1.1 Prepare an image file

        Copy d5B.IMG onto SCO OpenServer and rename it to VOL.000.000

            # mkdir /usr/test
            # doscp a:/<PATH>/d5B.IMG /usr/test/VOL.000.000

            * <PATH> is the driver directory.


    1.2 Execute "custom"

        /* A menu selection screen will be popped up */
        Use [->] key to move cursor to "Software" menu item. Press []
        key to get into pull down menu. Move to "Install New..." then
        press [ENTER] key.

         Begin Installation on scoopen ͻ
                                                           
          What host (machine) do you want to install from? 
                                                           
          Ŀ 
          <*> From scoopen                               
          < > From another host                          
           
                                                           
        ĺ
        [ Continue ]          [ Cancel ]           [ Help ]
        ͼ

        Select "From scoopen" and use [TAB] key to move cursor to [Continue].
        Press [ENTER] key and press [] key to get into pull down menu.

         Select Media ͻ
                                                                     
          Insert media, and select media device.                     
                                                                     
                       Ŀ 
          Media Device:|Floppy Disk Drive 0_____________________|v 
                       ͻ 
                        Ŀ                    
                        *Floppy Disk Drive 0                     
                         Media Images                            
        ĺٺĺ
        [ Continue ]    ͼ          [  Help  ]
        ͼ

        Select "Media Images" and use [TAB] key to move cursor to
        [ Continue ]. Press [ENTER] key and press [ENTER] key again.

     Enter Image Directory ͻ
                                                                            
     Enter the full path to the directory containing media images.          
                                                                            
     Image Directory: |/usr/test__________________________________________| 
                                                                            
     Note: media images must follow the naming convention VOL.000.000, etc. 
                                                                            
                                                                            
                                                                            
    ĺ
    [   OK   ]                     [ Cancel ]                     [  Help  ]
    ͼ

        Input the path name where VOL.000.000 is located as above path
        name is /usr/test.

     Install Preference on scoopen ͻ
                                                                            
    Installing: Legend/D-Link DFE-530TX PCI Fast Ethernet Device Driver (ver
                                                                            
    Do you want a FULL or PARTIAL installation?                             
                                                                            
    ĺ
    [ Full ]            [ Partial ]            [ Cancel ]           [ Help ]
    ͼ

        Use [TAB] key to move cursor to [ Full ] then press [ENTER] key.
        After the installation progress the following message is displayed,

                        Message ͻ
                            Installation complete     
                       ĺ
                                   [ OK ]             
                       ͼ

        press [Enter] key. You will find out that

            Legend/D-Link DFE-530TX PCI Fast Ethernet Device Driver (ver 1.1.3)

        is added to the package list.

        Use [<-] key to move cursor back to "Host" menu item. Press [] key
        to get into pull down menu then move to "Exit". Press [ENTER] key.

        Now that the driver is installed in the system successfully.


2. Use "netconfig" to configure the network driver

    /* A menu selection screen will be popped up. */
    At "Hardware" menu item press [] key to get into pull down menu. Move
    to "Add new LAN adapter" then press [ENTER] key.

    If you got a PCI NIC inserted on your machine, it will list as following:

     Add new LAN adapter ͻ
    The following adapters have been found:                                 
    Ŀ
    *   Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter Compatible - PCI
                                                                          
                                                                          
                                                                          
                                                                          
    ٺ
    [ Configure hardware not listed above... ]                              
    ĺ
    [ Continue ]                     [  Cancel  ]                 [  Help  ]
    ͼ

    If the "Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter..." has been
    displayed, press [ENTER] directly. Otherwise using [TAB] key to move to
    "Configure hardware not listed above..." then press [ENTER] key.

     Add new LAN adapter ͻ
    Select network adapter to be added:                                     
    Ŀ
    *   3Com EtherLink 16/16TP Adapter                                    ^
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
                       .                                                  *
        Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter                 *
                       .                                                  
                       .                                                  
                       .                                                  
                       .                                                  
                       .                                                  
                       .                                                  v
    ٺ
    ĺ
    [ Continue ]                       [  Cancel  ]               [  Help  ]
    ͼ

    Use [] key to move to "Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter".
    Press [ENTER] key.

     Network Driver Configuration ͻ
                                                                            
    Enter the configuration of Legend/D-Link DFE-530TX PCI Fast Ethernet    
    Adapter                                                                 
                                                                            
               Ŀ   [ Advanced   ]
     PCI Bus:  | 0_____________________________________|v     Options...  
                                
               Ŀ                 
      Device:  | 0_____________________________________|v                 
               ͻ                 
               ںĿĿ                 
    Function:    9   ^______________________________|v                 
                 10                   
                  11                                                    
       * - indic  12  *ict with other hardware                           
    ĺ* 13  *ĺ
    [   OK   ]    14  v        [ Cancel ]                      [  Help  ]
    ͺٺͼ
                 ͼ

    The above screen let you fill the information of where your PCI adapter
    is located by specifying PCI Bus number, PCI Device number and PCI
    Function number.

    Note1: If you can not make sure the PCI parameters or your PCI Device
           number can not be found in the list, just leave them as default
           values, continue the following installation. After the driver is
           installed, system is re-linked and reboot the system, driver will
           search PCI Ethernet card automatically.

    "Advanced Options" let you specify what media type is connected and flow
    control be enable or not. If you select it, the following screen will be
    popped up.

     Advanced Network Driver Configuration ͻ
                                                                            
    Enter the configuration of Legend/D-Link DFE-530TX PCI Fast Ehternet    
    Adapter                                                                 
                                                                            
                       Ŀ                          
    Media/Cable Type:  | Auto_________________|v                          
                       ͻ                          
                       ں ĿĿ                          
        Flow Control:   * Auto     _______|v                          
                          TP                                 
                           TP_FD                                        
       * - indicates con   TX100    r hardware                          
    ĺ   TX100_FD ĺ
    [   OK   ]           ٺcel ]                     [  Help  ]
    ͼͼ

    Select the connective media. Use [TAB] key to set Flow Control enable
    or disable.

     Advanced Network Driver Configuration ͻ
                                                                            
    Enter the configuration of Legend/D-Link DFE-530TX PCI Fast Ehternet    
    Adapter                                                                 
                                                                            
                       Ŀ                          
    Media/Cable Type:  | Auto_________________|v                          
                                                 
                       Ŀ                          
        Flow Control:  | Disable______________|v                          
                       ͻ                          
                         Ŀ                                     
       * - indicates con * Disable er hardware                          
    ĺ   Enable  ĺ
    [   OK   ]           ٺncel ]                     [  Help  ]
    ͼͼ

    Press [ENTER] key to go back to "Network Driver Configuration" screen.
    Use [TAB] key to move cursor to "OK" then press [ENTER] key.

     Information ͻ
    ---  Please verify adapter is set to the configuration just entered     
    ĺ
                                  [ OK ]                                    
    ͼ

    Press [ENTER] key.

     Add Protocol ͻ
    Select one networking product to be added to                            
    Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter:                      
    Ŀ
     HW Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter                 
    *   - SCO IPX/SPX                                                     
        - SCO TCP/IP                                                      
                                                                          
                                                                          
    ٺ
    ĺ
    [  Add   ]                      [ Cancel ]                    [  Help  ]
    ͼ

    Use [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.

     SCO TCP/IP Configuration ͻ
                                                             
                                                             
      Local Host Name:  |scoopen_____________| [ Advanced   ]
           IP Address:  |192.9.200.1_________|   Options...  
              Netmask:  |255.255.255.0_______|               
    Broadcast Address:  |192.9.200.255_______|               
          Domain Name:  |scoopen.com_________|               
      TCP connections:  |256_________________|               
          Pseudo ttys:  |32__________________|               
                                                             
                                                             
    ĺ
     [   OK   ]              [ Cancel ]            [  Help  ]
    ͼ

    Input the required information. Use [TAB] key to move cursor to "OK"
    then press [ENTER] key.

     Message ͻ
     The following products were successfully configured into the system  
     SCO TCP/IP                                                           
     Legend/D-Link DFE-530TX PCI Fast Ethernet Adapter - PCI Bus 0,Device 
       0,Function 0                                                       
                                                                          
    ĺ
    [ OK ]                                                        [ Help ]
    ͼ

    Press [ENTER] key.

    At "Hardware" menu item, press [] key to get into pull down menu. Move
    to "Exit" then press [ENTER] key.

     Question ͻ
         The Unix Kernel must be re-linked before the changes
    ???  made here will have an effect.                      
         Do you want to re-link the kernel now?              
    ĺ
    [ Yes ]                                            [ No ]
    ͼ

   Press [ENTER] key.

   Do you want this kernel to boot by default (y/n)    y

   Do you want the kernel environment rebuilt (y/n)    y

3. Reboot unix

   # shutdown -y -g0

***************************************************
* Another way to specify driver's PCI parameters  *
***************************************************

. Another way to modify PCI parameters is setting at booting time, shown
  as below:

   1. Specify PCI Bus#, PCI Device# and PCI Function#

       Boot
       : unix net.mdi=d5B(0) net.param=(pcb:0,pcd:14,pcf:0)

   2. Auto-search PCI adapter card

       Boot
       : unix net.mdi=d5B(0)


Note2: The IRQ number must match with the value set in ROM-BIOS before you
       specify this value, please check it.
       The IRQ for PCI bus can be accessed by pressing [DEL] key when
       system is power on and choose the proper select item to set IRQ
       for PCI bus.

       Example: ROM PCI/ISA BIOS (2A4X5C31)
                   PCI/GREEN FUNCTION SETUP
                  AWARD SOFTWARE, INC.

             Press [DEL] key  -->  PCI/GREEN FUNCTION SETUP

                                   Slot 3 Using INT# : A-PIRQ1
                                           .
                                           .
                                           .
                                   PIRQ1# Connect IRQ: 5 By Single
                                                       ~

